26
www.Aprimatic.it
Display Description
Factory settings
TERA
How to erase all stored badge. Choose between the following values:
NO = no erase
YES = cancellation of all badges
NO
SAM1
First setting of function selector, when the 1
‐
G1 contact becomes closed. Set the menu ADV > STG1 >
SAM.
Connect the contact of a clock to 1
‐
G1 terminals, and choose between the following values:
OPEN = open door
AUTO = automatic bi
‐
directional operation
CLOS = closed door
1D = automatic one
‐
way operation
CLOS
SAM2
Second setting of function selector, when the 1
‐
G1 contact becomes open. Set the menu ADV > STG1 >
SAM.
Connect the contact of a clock to 1
‐
G1 (1
‐
G2) terminals, and choose between the following values:
OPEN = open door
AUTO = automatic bi
‐
directional operation
CLOS = closed door
1D = automatic one
‐
way operation
CLOS
FW
Programming procedure of function selector.
Download the function selector Firmware, available at
www.Aprimaticspa.it
it in Download area.
Extract the "BFDS" folder from the ".zip" file and copy it to a micro SD memory (not in subfolder). Insert
the micro SD memory in the electronic control.
From this menu, choose the firmware version you want (from 0200 to
‐
‐
‐
‐
).
Press ENTER until it starts the programming procedure that lasts about 30 seconds (the display shows
“WAIT • • • •”), at the end the display shows "SAVE".
After the procedure, remove the micro SD memory from the electronic control and store it for future
use.
Note: in the case of programming error or missing firmware (W103), proceed as follows:
disconnect the
power supply, insert the micro SD memory, give power supply, and repeat the programming procedure
from this menu.
‐
‐
‐
‐
VER
Displaying the firmware version of function selector (eg = 0200).
‐
‐
‐
‐
