31
|
© 12128_Apricus_DeltaSol_BS4_V2.monen.ind
d
DeltaSol
®
BS/4
6"US
®
53"INTERFACEADAPTER
The new VBus
®
/ USB interface adapter is the interface between the controller and a
personal computer. With its standard mini-USB port it enables a fast transmission of
system data via the VBus
®
for processing, visualizing and archiving. A full version of the
ServiceCenter software is included.
6"US
®
07-INTERFACEADAPTER
The VBus
®
/ PWM interface adapter is used for the speed control of a pump via a PWM or
0-10 V signal. Via the VBus
®
, the adapter receives information from the controller about the
necessary pump speed. The speed is converted into a PWM or direct voltage signal and put
out to the corresponding terminals.
AM1 Alarm module
The AM1 alarm module is designed to signal system failures. It is to be connected to the
VBus
®
of the controller and issues an optical signal via a red LED if a failure has occurred.
The AM1 also has a potential-free relayoutput, which can e. g. be connected to a building
management system (BMS). Thus, a collective error message can be issued in the case of a
system failure.
6"US
®
,!.INTERFACEADAPTER
The VBus
®
/ LAN interface adapter is designed for the direct connection of the controller
to a PC network or router. It enables easy access to the controller via the local network of
the owner. Thus, controller access and data charting can be effected from every workstation
of the network. A full version of the ServiceCenter software is included.
DL3 Datalogger
Be it solar thermal, heating or DHW heat exchange controllers – with the DL3, you can
easily and conveniently log system data of up to 6 controllers. Get a comprehensive over-
view of all controllers connected with the large full graphic display. Transfer data with an SD
memory card or use the LAN interface to view and process data on your PC.
