APQS Lucey Deluxe Table Manual Download Page 39

Page: 39 / 81

9-1-2022

APQS.com

Lucey Deluxe Installation

Install the Roller Handles

Tools Required: 5/32” Allen Wrench

Parts Required: 3 Roller Handles (2 for optional Automatic Quilt Advance)

Roller handles are installed on the three canvas covered rollers, not on the Leveler Bar (no canvas). If you

purchased the optional Automatic Quilt Advance, the Pick-Up Roller will not need a roller handle.

Each handle is installed using

a 5/32” Allen wrench. Make

sure the Allen set screw is not

extending into the handle

mounting hole.

Align the handle set screw with the flat side of the Roller Shaft.

Push the handle on to the shaft and tighten the set screw for

both the Quilt Top and Backing Rollers.

Summary of Contents for Lucey Deluxe Table


















































































Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands

APQS Lucey Deluxe Table, Manual

Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands