APQS Lucey Deluxe Table Manual Download Page 20

Page: 20 / 81

9-1-2022

APQS.com

Lucey Deluxe Installation

Position the Table Top

Place an adhesive felt dot on top of the rail directly in line

with each cross tube (Photo A). Place two more felt dots

on each rail equally spaced between the dots that are in

line with the cross tubes (Photo B).

Place one table top section on the table,

taking care to place the center sections over

one set of bumpers on the center cross tube.

Place the painter’s tape side of the plastic

pantograph cover facing the rear (pantograph)

side of the table.

Make sure the sections meet in the center with

each half suppoted on the center cross tube

bumpers.

Remove the painter’s tape from the plastic pantograph cover. (Paper patterns will be placed under the

plastic cover when quilting from the pantograph side of the frame.)

Summary of Contents for Lucey Deluxe Table


















































































Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands

APQS Lucey Deluxe Table, Manual

Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands