10
9-1-2022
APQS.com
Lucey Deluxe Installation
Step 1: Assemble the Rails & Legs for Deluxe Table
Tools
Utility Knife
Required: Wire Cutter or Scissors
Phillips Screwdriver
½-inch Box-End Wrench
½-inch Socket Wrench
3/4-inch Box-End Wrench
or Crescent Wrench
Rail Box (Box 1)
THE RAIL BOX DOES NOT NEED TO BE MOVED TO YOUR SEWING AREA IMMEDIATELY; it is a heavy box and can be
opened before moving.
1.
Remove two Phillips-head screws from each side of the top cover of box.
2.
Using utility knife, cut packing tape on box.
3.
Once open, cut zip ties from rails using wire cutters or scissors.
4.
Locate all hardware. (Attached to rails under a zip tie, packed in plastic. Do not throw this away.)
5.
MOVE rails to sewing area individually; be aware of sewing table orientation before moving the rollers
and rails. Each roller is stamped for the use of each: “Backing,” “Pick-Up,” “Quilt Top.” The stamped
portion of the roller will be installed to the right or needle side of the frame. The rails will be installed
with the flat side of each rail facing each other.
