APQS Lucey Deluxe Table Manual Download Page 13

Page: 13 / 81

9-1-2022

APQS.com

Lucey Deluxe Installation

Attach Legs to Rails

Tools

½ - inch Box-End Wrench

Required: ½ - inch Socket Wrench

Parts

2 Rails

Required: 2 Leg Ends

Install the Rear Rail to the Table Legs

Images below show adding the rear rail to the right leg first, based on the orientation described above.

However, you could start with the left leg if it is more convenient, but keep in mind the photo orientation.

The flat rail side faces the leg’s center. Lift the rail end

on to the leg’s rear mounting bracket. Tilt the leg

toward the rail so that the rail is flush with the

mounting bracket on the leg.

Insert two bolts (B) through the

rail and leg mounting bracket.

Add lock washers (C) and nuts

(D). HAND TIGHTEN FOR NOW.

Summary of Contents for Lucey Deluxe Table


















































































Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands

APQS Lucey Deluxe Table, Manual

Search results

Summary of Contents for Lucey Deluxe Table

Reviews:

Related manuals for Lucey Deluxe Table

Brands by name

Popular brands