APPLIED ACOUSTICS SYSTEMS Easytrak Nexus Lite 2683 Operation Manual Download

Page: 63 / 124

2695 Series Operation Manual

EZT-2695-8000/1

Page

124

Tools Menu

A number of tools/utilities are available via the tools menu such as system programming,
calibration etc.

Programming

From the programming menu the software in both the console and the transceiver may be updated
with data files supplied from Applied Acoustics.

The transceiver contains both ARM and DSP firmware, these may both be reprogrammed from the
utilities accessible from this menu.

The Nexus console firmware may also be updated.

Below is an example of the Nexus Transceiver programming utility

The programming procedure is the same for all updates and is as follows

•

Insert a USB memory stick containing the update file.

•

Launch the required programming tool.

•

Open a source file – the browser automatically selects the external drive and sets the file

filters to the correct type depending on the application. Select the desired file.

•

Click Program, the progress bar then indicates the state of the update.

•

If required, the system will prompt to shut down the unit.

•

If required, power up the system to complete update and operate as normal.

Summary of Contents for Easytrak Nexus Lite 2683





























































































































Search results

Summary of Contents for Easytrak Nexus Lite 2683

Reviews:

Related manuals for Easytrak Nexus Lite 2683

Brands by name

Popular brands

APPLIED ACOUSTICS SYSTEMS Easytrak Nexus Lite 2683, Operation Manual

Search results

Summary of Contents for Easytrak Nexus Lite 2683

Reviews:

Related manuals for Easytrak Nexus Lite 2683

Brands by name

Popular brands