2695 Series Operation Manual
EZT-2695-8000/1
Page
45
of
124
Data
The ‘Data’ tab displays position and signal quality data.
There are 5 data sets continuously calculated by the system from the raw acoustic measurements.
Corrected, North, Gated Smoothed and Kalman Filtered. The values of these are displayed in the
top section.
Signal Quality
•
Levels
S0 (Minimum) to S9 (Maximum), is an indication of the signal received at each of the
receiver elements (channels).
•
Signal to Noise Ratio (SNR’s)
This is the signal to noise ratio measured at each of the receiver channels.
Depth Telemetry
This is the depth telemetry data received from a depth telemetry enabled beacon.
Depth Ext.
This displays the depth data received from an assigned external serial port (see System
Configuration -> Data In).
Heading Ext.
This displays the heading data received from an assigned external serial port (see System
Configuration -> Data In).
SVP VOS
This displays the velocity of sound value used from the loaded sound velocity profile (see System
Configuration -> Speed of Sound Profile)
Histogram
This shows the status of last 16 interrogations of the displayed beacon.
•
Green -
Good
•
Amber -
Gated Position (only shows if gated or smoothed data is selected)
•
Red
-
No response from beacon
Summary of Contents for Easytrak Nexus Lite 2683
