APPLIED ACOUSTICS SYSTEMS Easytrak Nexus Lite 2683, Operation Manual

Page: 55 / 124

2695 Series Operation Manual
EZT-2695-8000/1
Page 55 of 124
•
Display Mode
The display mode can be set to grid or polar.
•
Vessel
The label and vessel scaling can be toggled on // off. This along with other vessel settings
may also be adjusted from Edit Workspace – Vessel.
•
Waypoints
A waypoint can be added (its position will be the point at which the right mouse was clicked
from the plot window).
All waypoints can be deleted (a confirmation prompt will be displayed).
All waypoints visibility may be turned on or off.
•
Placemarks
A placemark can be added (its position will be the point at which the right mouse was
clicked from the plot window).
All placemarks can be deleted (a confirmation prompt will be displayed).
All placemarks visibility may be turned on or off.
•
Display Reference
The current Display and Data Out mode can be set.
•
Display Centre
The current centre of the plot window can be selected. Options are Vessel, any waypoint or
any active beacon.
•
Workspace File
A workspace file may be loaded or saved from this menu.
The plot window scale may be changed by zooming in and out. This may be
achieved using the wheel mouse when the plot window is active. Alternatively
the ‘Zoom In’ and ‘Zoom Out’ buttons on the toolbar can be used.
The plot window may also be ‘ panned ’ by pressing and holding the left mouse button whilst
dragging the display (please note the display will not change until the left mouse button is
released). This effectively
fixes the plot window centre point to a specific x/y (or Easting/Northing)
value.
If panning has been applied, the centre point may be set back to vessel, waypoint of
active beacon as previously described. Alternatively the ‘Centralize’ button on the
toolbar will revert the centre point of the window to the previously selected centre
mode before any panning was carried out.