2695 Series Operation Manual
EZT-2695-8000/1
Page
40
of
124
Beacon Editor
Toolbar Button:
Shortcut Key: Ctlr+B
The tabs contained within the ‘Beacon Editor’ window are described below. Note that the title bar of
this window shows the name of currently loaded beacon setup file in brackets.
Beacon Editor Context Menu
Pressing the right mouse button when over the beacon editor window will show the ‘Context Menu’
as below
From this menu the following functions can be performed
•
Turn Tracking On
•
Load or Save a Beacon Setup File – This will load or save the values for ALL beacon
setups (including the Kalman Filter configuration for each beacon)
Load or Save a Kalman Filter Configuration File
This save the Kalman Configuration for ONLY the individual beacon selected
A Kalman Configuration may be loaded for the currently selected beacon or for ALL beacons
General
The General tab allows the operator to set the individual beacon parameters for up to 16 different
beacons. To select the required beacon, use either the mouse wheel or the ‘<<’ and ‘>>’ buttons
Summary of Contents for Easytrak Nexus Lite 2683
