2695 Series Operation Manual
EZT-2695-8000/1
Page
52
of
124
•
Set ID – A new release beacon ID may be programmed into the beacon by entering a new
ID value into the text box and pressing the ‘Set ID’ button.
Important:
Please ensure that after a new ID has been programmed successfully, the
‘Release ID’ value is changed to match the newly programmed ID
Beacon Data
Toolbar Button Shortcut Key: Ctrl+D
This window displays all of the beacons that are being interrogated.
•
The shows the last beacon that was interrogated.
•
The ‘Visible’ check box determines if the beacon is displayed in the plot window.
•
The beacons description is displayed here. The description may also be edited from here.
•
X and Y (or Eastings and Northings) indicate the relative or absolute co-ordinates on the
horizontal plane in meters.
•
Z is the distance of the target below the transducer or reference point in meters.
•
SRng is the slant range to the target in meters.
•
HDist is the horizontal distance to the target in meters.
•
Brng is the bearing to the target in degrees.
The Set ID function may only be performed when the transceiver is out of the water. The Set ID
function will be disabled if the transceivers depth is greater than 1.0m
Summary of Contents for Easytrak Nexus Lite 2683
