Applent Instruments AT381x, User Manual, Page: 36 / 134

AT381x User's Guide
36
5. [Setup] Key
In this chapter users will learn about all the setup features:
• MEAS SETUP page
• CORRECTION page
•
BIN TABLE page (Comparator setup)
•
LIST TABLE page
You can press the [Setup] key to open the <MEAS SETUP> page.
5.1 <MEAS SETUP> Page
All measurement related settings are operated in the <MEAS SETUP> page.
In <MEAS SETUP> page, the Instrument does not display test result and sorting result, but
testing still in progress.
These settings include the following parameters:

[FUNC] – Measurement Function

[RANGE] – Impedance Range

[FREQ] – Measurement Frequency

[TRIG] – Trigger Mode

[LEVEL] – Measurement Level

[SPEED] – Measurement Speed

[SRC RES] - Source Output Impedance

[AVG] – Averaging Factor

[BIAS] – DC voltage bias

[MON 1] – Monitor parameter 1

[AUTO LCZ] - Automatic LCZ Function

[MON 2] – Monitor parameters 2

[DELAY] – Delay time after trigger and before measurement

[ALC] – Automatic Level Control

[NOMINAL] – Nominal value of comparator
NOTE: Some settings can be set in <MEAS DISPLAY> page and <BIN MEAS> page.
Please refer Sector 4.1<MEAS DISPLAY> Page to set.
Figure 5-1 <MEAS SETUP> Page