Page 14 of 60
7.
Operation Process
This robot variously operates by program operation.
To operate the robot, creating program is firstly necessary.
Operating process is as follows:
“Teaching” means creating program and inputting any setting to the robot.
It is called “Teaching data” that is registered to the robot by “Teaching”.
Start up preparation
Program number selection
Point coordinates input
Point type selection
Soldering condition number input
Soldering condition input
Test
Running
Point teaching
Repeat as many as
the number of point
Refer to “8.Start Up Preparation” for more
detail.
Refer to “9. Program Number Selection” for
more detail.
Refer to “11~14. Program Setting” for more
detail.
Refer to JANOME operation manual,
Quick start for more detail.
Refer to JANOME operation manual,
Quick start for more detail.
