Rev. A, 6/15
MND
23
Step 5:
Check the USB Communication
box when using an RST-6001 RS-485 to
USB converter.
or
Select the Com Port assigned to the
RS-485 to RS-232 converter being used.
Step 7:
Select MND
Step 6:
Ensure Sensor #
matches the Sensor Address
setting in the MND.
Step 8:
Once all the changes have been
made, click “Save Config” then click “Close”
Step 9:
Click on “Sensor 1 “ to enter the
programming window for the MND.
www.
.com
1.800.561.8187
