MND
Rev. A, 6/15
8
*Access Modes
The MND has several operating modes which will limit or lock access to the setup
menus. Refer to the mode descriptions at the bottom of the page for more information.
To access the operating mode setting, follow the steps below.
Step 1:
Simultaneously press and hold the Decrease button and the Enter button for
approximately 5 seconds to bring up the *3 digit mode access number.
Step 2:
Use the Increase/Decrease buttons to change the value of the flashing
digit,and Enter button to accept the value and advance to the next digit. The
mode options are as follows:
Mode
Description
000
Full Access. All menu options are accessible, including those that
may not be applicable to all MND configurations.
001
Locks access to all setup menus. The Increase Button will scroll
through sensor readings when the MND is configured for multiple
sensors. The Decrease/Power Button will turn on/off the display. The
Enter button will scroll between the maximum, minimum and the
current reading.
002
Hides the Output menu. All other setup menus are accessible.
003
Hides the analog options in the Output menu--only the relay options
are accessible.
004
Hides the relay options in the Output menu--only the analog options
are accessible.
005
All menus are hidden and all buttons are lock, except the Decrease/
Power button, which will power on/off the MND.
*Also see “
Setting Mode Access Password”
under Sensor Label section of page 21.
www.
.com
1.800.561.8187
