Rev. A, 6/15
MND
21
•
SENLAb
(Sensor Labels)
Allows the user to assign a custom label for each sensor being displayed (up to 10
s an LOE/RST master). The sensor label will appear on the lower display line,
which will alternate between the Sensor Label and the selected Unit of measure.
NOTE:
Setting a Mode Access Password
(refer to Access Modes on page 8).
If a label is assigned for Sensor 10, the label becomes the password to access the
Mode setting. If the label for sensor 10 is set to the default of
10AAAA
, then no
password will be required to access the Mode setting.
•
PCTFUL
(Percent Full)
Allows sensor readings to be displayed as a percentage of full based on a user defined
100% value.
To enable the Percent Full feature, select
PCTFUL
in the main menu. Select
the sensor number you want to display as a percentage of full, and enter the value
associated with 100%. 0% (empty) is assumed to be 0. Setting the value to 00000
(default) will disable the Percent Full feature.
NOTE: the label
PCTFUL
will automatically be displayed as the units of measure
for all sensors running in Percent Full mode.
NOTE: when controlling one of the MND’s outputs with a sensor setup to display in
Percent Full mode, the settings controlling the output need to be entered based on
the underlying readings and not the displayed percentage value.
• *
bLIGHT
(Back Light)
*Optional Feature
The Mode options include: On, Off, 30 Sec, 1 min, 2 min, 4 min, 8min and 16 min. To
adjust the backlight intensity, select brightness (
bRTNES
) in the menu and use the
up/down arrow buttons to increase/decrease the brightness.
www.
.com
1.800.561.8187
