64
TC5-1N5FAB rev.06
POSITION
DISPLAY
MEANING
ROOM
TEMPERATURE
steady value
Room temperature
Pr1 - On/OFF
Pr2 - On/OFF
Pr3 - On/OFF
Pr4 - On/OFF
Room temperature and on/off state for probe x
Lo / Hi
Minimum / Maximum temperature value.
SET POINT / T°
CURVE
flashing value
User-adjusted set point.
steady value
Set point calculated using the temperature
curve.
On / OFF
Status of temperature curve.
dAY
Day number of the current temperature curve
point.
set
Set point of the current temperature curve point.
FUNCTION SUMMARY
9
TC5-1N5FAB rev.06
TC5-1N5FAB
The relationship between the voltage supplied to a motor and its operating
speed is described by a motor curve. This curve varies with the make and
capacity of the motor. The various motors available in the industry have been
divided into ten categories and the controller has been programmed with a
different motor curve for each of these categories. To ensure that the
controller supplies the correct voltages, an appropriate curve must be
selected for Stage 1 according to the type of fan motors used.
Selecting a Motor Type for Stage 1
Refer to the list of motors enclosed with this user's manual to determine which
curve number (1 to 10) is appropriate for the type of motors used.
n
Set the selection knob to
STAGE 1 — BANDWIDTH/
TIMER
. The Stage 1 bandwidth is
displayed and flashes.
n
Press the push-button three times.
The currently selected type is dis-
played, alternating with the letters
"
tYP
".
n
Use the adjustment knob to adjust the motor type to the desired value.
n
Return to the Stage 1 bandwidth display either by pressing the push-
button once again.
M
OTOR TYPES
