42
TC5-1N5FAB rev.06
TC5-1N5FAB
3
Adjusting Mist Timer Settings
Time on and time off can be adjusted between 0 and 60 minutes, in increments
of 1 minute. To deactivate mist cooling, set time on to zero.
n
Set the parameter selection knob to
MIST — TIMER/OFFSET/DIFF
.
The current mist time on is displayed, alternating with the letters "
On
".
n
Use the adjustment knob to set time on to the desired value.
n
Press the push-button. The current time off flashes, alternating with
the letters "
Off
".
n
Use the adjustment knob to set time off to the desired value.
4
Adjusting Humidity Turn Off Level
The humidity turn off level is the humidity level at which mist units are turned
off. This parameter is not displayed unless humidity compensation is
activated (see Humidity Compensation). The value ranges from 40 to 100%.
When the mist units are turned off, the compensation pilot light turns on.
n
Set the parameter selection knob to
MIST — TIMER/OFFSET/DIFF
.
The current mist time on is displayed, alternating with the letters "
On
".
n
Press the push-button four times. The current turn off level is dis-
played, alternating with the letters "
StP
" and "
rh
".
n
Use the adjustment knob to set the turn off level to the desired value.
31
TC5-1N5FAB rev.06
TC5-1N5FAB
n
Press the push-button. The relative humidity set point is displayed,
alternating with the letters "
set rH
".
n
Use the adjustment knob to adjust the set point to the desired value.
3
Adjusting Minimum Speed Compensation
This is the percentage increase in minimum speed for a relative humidity
equal to the humidity set point + 10%. The value ranges from 0 to 100%.
n
Set the selection knob to
STAGE 1 — HUMIDITY CONTROL
. The
current humidity reading is displayed.
n
Press the push-button twice. The current minimum speed compensa-
tion is displayed, alternating with the letters "
SPd
".
n
Use the adjustment knob to adjust the minimum speed compensation
to the desired value.
4
Activating / Deactivating Humidity Compensation
n
Set the selection knob to
STAGE 1 — HUMIDITY CONTROL
. The
current humidity reading is displayed.
n
Press the push-button three times. The current on/off state of humidity
compensation flashes on the display.
n
Use the adjustment knob to adjust the on/off state to the desired value.
