AIR QUALITY
MOBILE
50P
Jan 2012
Automatikprodukter
3 . 4 . 1
i o n i s a t i o n w i r e s
The electrostatic cell has 9 ionising wires. These must be intact, clean and well-tensioned at all times. If one
breaks, it is necessary to replace it. The technical service must be called in this case.
The manufacturer will not guarantee the efficiency of the filter unit if non-original wires are inserted or wires
which are not of the type recommended by the technical service.
3 . 4 . 2
c o l l e c t i o n b l a d e s
The function of the collection blades which make up the central body of the cell is to capture and hold the
pollutant agents. Visually, the blades must be straight, without undulations and free from trapped foreign
bodies.
3 . 4 . 3
i n s u l a t o r s
The insulators are built in an extremely high quality ceramic material and their function is to electrically
insulate the high-voltage parts of the electrostatic cell from the earthed parts.
They must be dry and thoroughly clean after maintenance.
3 . 4 . 4
c o n t a c t t e r m i n a l s t r i p
The terminal strip for the contacts is the point through which the electrical connection is made between the
electronic circuit and the electrostatic cell. During maintenance, inspect to ensure that the flexible arches are
intact. Also ensure that there are no burns or cracks on the terminal strip caused by the voltage.
4
S A F E T Y D E V I C E S
The machine is fitted with mechanical and electrical safety devices which must not be removed or altered for
any reason.
4 . 1
M E C H A N I C A L S A F E T Y D E V I C E S
The grill, where the air to be cleaned passes through, is designed to protect persons from accidental contact
with the live parts. This grill can only be removed in the event of extraordinary maintenance or repair
operations.
In all cases, before removing it, it is necessary to cut off the electrical power.
NEVER INSTALL OR START THE AIR PURIFIER WITHOUT THE PROTECTIVE GRILL.
There are air diffusion fins in the top of the machine. They have the double function of diffusing the purified
air and avoiding accidental contact with the electric fan which, in turn, is protected inside by a further
protective grill. These fins can only be removed in the event of extraordinary maintenance or repair
operations. In all cases, before removing a safety device, it is necessary to cut off the electrical power.
NEVER INSTALL OR START THE MACHINE WITHOUT THE DIFFUSION FINS.