AIR QUALITY
MOBILE
50P
Jan 2012
Automatikprodukter
5 . 1 . 2
W a s h i n g t h e f i l t e r s
Filter maintenance is important both for the correct operation of the machine and for constant performance
with the passage of time. The following materials are required for maintenance:
1) Two plastic trays, one with the bottom raised 2-3 cm for decanting the dirt. As an alternative to the raised
bottom, use a stainless steel frame.
2) Non-corrosive detergent for washing the electrostatic cells, supplied by an authorised dealer.
3) A rubber tube for rinsing the filters.
4) Vinegar.
Prepare the tray with the raised bottom with warm water (max 45°C). Dilute the detergent in the proportions
indicated on the label of the detergent itself.
Put the vinegar and water in the other (1 litre of vinegar for every 20 litres of water).
warm water and detergent
tray in plastic or stainless steel
electrostatic cell
frame in stainless steel
To wash, proceed as follows:
a) immerse the electrostatic cell in the tray with the detergent and soak until the dirt is dissolved
b) remove the electrostatic cell and rinse thoroughly with running water, taking care not to break the
ionisation wires
c) immerse the cell in the tray containing the water and vinegar and leave to soak for 5-10 minutes.
rinsing with current water
drying
