AIR QUALITY
MOBILE
50P
Jan 2012
Automatikprodukter
9 . 2 . 2
M A N U A L A N D O N - O F F F I L T E R B U T T O N S
The MANUAL button allows the air flow to be modified manually
(OFF-1-2-3); the setting is memorised and maintained even if there is a
power failure.
The ON/OFF button is for activating/deactivating the filtration function and
the negative ionisation. It is used when you need to completely dry the
filtering unit after washing, or to use the machine for the ventilation function
only.
9 . 3
O P E R A T I O N O F T H E M A C H I N E
These three Leds indicate the operating status of the Air Purifier:
- FILTER ON
(yellow led ):
when this is on, it means that filtering and
ionisation are on.
- FILTER OK
(green led):
high filtering efficiency and emission of ions
- MAINS
(green led):
power on (constant)
9 . 4
I N F R A R E D R E M O T E C O N T R O L U N I T
The remote control unit allows you to control the machine, modifying the air flow from a distance of
about 6-7 metres. The following functions are provided:
How to use: point the remote control towards the control panel, taking care that you
are in line with it at a distance no greater than 6-7 metres.
The infrared transmitter is powered by a 9-volt battery, type PP3 (transistor).
9 . 5
P O W E R S U P P L Y A N D A N T I B L A C K - O U T S Y S T E M
The machine is powered by a mains voltage of 210 to 240V AC at 50 Hz.
A momentary (or prolonged) power failure does not cause the resetting of the machine functions and when
power is restored the machine goes back into operation on its own.
ATTENTION:
always connect the apparatus to the earth to protect persons, things and animals and
respect CEI 11-29, CEI 64-8, and EN 60335 standards.
- 1st FAN SPEED key:
- 2nd FAN SPEED key:
- 3rd FAN SPEED key:
- OFF key:
sets the “maintenance” flow
(room half empty)
sets the “normal use” flow
(room half-full)
sets the “emergency” flow
(room crowded)
turns off the air purifier
