AP Expert VT-110, User Manual

Page: 54 / 84

Chapter 14: Outputs
Enabling the Soaking Output
The soaking output is used to clean the room when it is empty. This output runs in timer mode when the
controller is in clean mode.
1. Using the menu select arrow keys, navigate to Start / Stop Temp→Soaking .
This parameter is accessible if the soaking output is enabled.
2. Set the time used by the soaking output.
3. Select the number of soaking cycles to be performed from the moment the controller enters into
clean mode (none to cont.).
Heating Stages: How it Works
Reference temperature
The On and Off temperatures of heating stages are related to the temperature set point. This means they
are automatically adjusted when the set point changes.
Heaters 1 and 2
The controller has 2 basic heating outputs.
Heaters high fire
In addition to its 2 basic heating outputs, the controller can simulate additional heating outputs with the Hi
Fire option. When this option is used, the controller doubles the number of heating outputs in use. Each
heating output (Hi Fire Step) operates as a regular heating output, with its own start/stop temperatures,
relay selection. Each high fire must use the same probes selected for the corresponding low fire.
54 890-00081 Expert VT-110