AOpen 1847, User Manual

Page: 97 / 116

87
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Setup Utility. See “BIOS Utility” on page 73.
Parity Check 1 nnnn* Parity error found in the system bus. BIOS attempts to
locate the address and display it on the screen. If it cannot
locate the address, it displays
nnnn . Parity is a method for
checking errors in binary data. A parity error indicates
that some data has been corrupted.
Parity Check 2 nnnn* Parity error found in the I/O bus. BIOS attempts to locate
the address and display it on the screen. If it cannot locate
the address, it displays
nnnn .
Press <F1> to resume,
<F2> to Setup, <F3> for
previous Displayed after any recoverable error message. Press
<F1> to start the boot process or <F2> to enter Setup and
change the settings. Press <F3> to display the previous
screen (usually an initialization error of an Option ROM,
i.e., an add-on card). Write down and follow the
information shown on the screen.
Run the I2O Configuration
Utility One or more unclaimed block storage devices have the
Configuration Request bit set in the LCT. Run an I2O
Configuration Utility (e.g. the SAC utility).
Error Messages Corrective Action
K3D-e.book Page 87 Monday, May 5, 2003 4:11 PM