Technical Manual | 808AH V1.2
18
CONFIGURATION | Anyload Weigh & Measure Inc. @ www.anyload.com
4.6
F3
P
ROTOCOL
S
ETTING
Function
Value
Setting
Description
F3.0
Operating Modes
0
1
2
Auto
Preset
Manual
Auto mode attempts to learn communication protocols at startup.
Preset mode uses its internal saved table to set best format.
Manual mode scans regularly to find best format.
F3.1
String Length
1-50
1-50
It determines total length of an incoming string.
F3.2
Weight Position
1-50
1-50
It determines start position of weight in a string.
F3.3
Weight Length
3-50
3-50
It determines number of weight numerical characters in a string.
F3.4
End Character
Main
01
02
03
04
10
13
SOH
STX
ETX
EOT
LF
CR
It sets end character of regular strings unless is mentioned otherwise.
Default is <CR>.
F3.5
End Character
Special
01
02
03
04
10
13
SOH
STX
ETX
EOT
LF
CR
It sets end character in special programs.
It used for special utility programs available in utility setting.
Default is <CR>.
F3.6
Decimal Point
0.0
0.00
Auto
0.0
0.00
None
If set to Auto, it detects decimal point from the incoming string as default.
If set to 0.0, it shows one decimal place.
If set to 0.00, it shows two decimal places.
If set to None, the decimal point is OFF.
F3.7
Status
Annunciators
Auto
GR
NT
None
If set to Auto, it detects status from an incoming string as default.
If set to GR, it locked to show gross weight.
If set to NT, it locked to show net weight.
If set to None, both Status Annunciators will be OFF.
F3.8
Units
Annunciators
Auto
lb
kg
None
If set to Auto, it detects unit from an incoming string as default.
If set to lb, It locked to LB to show pounds.
If set to kg, It locked to KG to show kilogram.
If set to None, both Status Annunciators will be OFF.
F3.9
Over Load
OU
CC
EE
Auto
O
C
E
It determines over / under load conditions.
It searches O in string.
It searches C in string.
It searches E in string.
If set None, over cap is off.
