Technical Manual | 808AH V1.2
16
CONFIGURATION | Anyload Weigh & Measure Inc. @ www.anyload.com
4.4
F1
D
ISPLAY
S
ETTING
Function
Value
Setting
Description
F1.0
Factory Reset
0
1
Abort
Factory
If set 1, remote display will reset its functions to default factory settings.
F1.1
Setup Lockout
0
1
Allowed
Prevented
If set 1, any changes to settings is prevented.
This is useful to disable setup menu to avoid unwanted changes.
F1.2
Energy Saving
0
1
2
3
Disabled
Level 1
Level 2
Level 3
Manages energy saving by adjusting the brightness.
If set 0, energy saving is disabled.
If set 1, display reduces brightness if no activity on display for 15 min.
If set 2,3, display reduces brightness if scale weight at 0 for 15 min.
F1.3
Day / Night
Brightness
Control
0
1
Disabled
Enabled
If set 0, brightness level is always set to day time level.
If set 1, light sensor is active and monitors day and night.
F1.4
Day Time
Brightness
Setting
100
80
50
20
100 %
80 %
50 %
20 %
Sets day time brightness level.
Brightness level is shown in percentage.
Daytime is monitored by onboard light sensor.
F1.5
Night Time
Brightness
Setting
100
80
50
20
100 %
80 %
50 %
20 %
Sets night time brightness level.
Brightness level is shown in percentage.
Nighttime is monitored by onboard light sensor.
F1.6
Startup Test
0
1
Disabled
Enabled
Runs display test at startup as default.
F1.7
Blank On Motion
0
1
Disabled
Enabled
If set 1, blanks display on motion condition.
F1.8
Mirror Display
0
1
2
Disabled
Enabled
Toggle
Used to reverse display to be visible in truck mirrors.
If set 1, it shows display in reverse.
If set 2, it toggles display in every 3 seconds.
If set 0, the function is disabled.
F1.9
Filter Display
0.25
0.50
0.75
1.00
0.25 sec
0.5 sec
0.75 sec
1 sec
Sets display update refresh time in seconds.
It can be used based on sensitivity of the indicator.
It can be used combined with blank on motion function.
