Anyload 808 Series, Technical Manual

Page: 19 / 28

Technical Manual | 808AH V1.2
Anyload Weigh & Measure Inc. @ www.anyload.com | CONFIGURATION 17
4.5
F2 U
TILITY
S
ETTING
Function Value Setting Description
F2.0
Utility Programs
0
1
2
3
4
5
0
1
2
3
4
5
Utility programs used for custom applications.
Special programs used for multi display applications.
Availability of this function is based on firmware release.
The programs availability may vary based on the firmware.
F2.1
Multiple Remote
Address
0
1
2
3
4
5
6
7
8
9
Id 0
Id 1
Id 2
Id 3
Id 4
Id 5
Id 6
Id 7
Id 8
Id 9
It is used in multiple display applications.
Each remote display has an address in multi display applications.
Address 0 is considered broadcasting data to all displays.
Availability of this function is based on firmware release.
F2.2
Data Timeout
Default
10
20
30
40
50
60
10 sec
20 sec
30 sec
40 sec
50 sec
60 sec
It sets display timeout in seconds if communication is lost.
It is used for regular programs as default unless mentioned otherwise.
The display shows dashes or blank if received data is timed out.
F2.3
Data Timeout
Custom
0.00
0.25
0.50
1.00
1.50
0 min
0.25 min
0.5 min
1 min
1.5 min
It sets display timeout in minutes if communication is lost.
It is used for special programs and message modes.
If set 0, the display holds last showing.
If none 0, the display shows dashes or blank if is timed out.
F2.4
Data Timeout
Message
0.00
0.25
0.50
1.00
1.50
0 min
0.25 min
0.5 min
1 min
1.5 min
It sets display timeout in minutes if communication is lost.
It is used for special programs and message modes.
If set to 0.00, the display holds the last showing, otherwise, the display
shows dashes or blank if it is timed out.
F2.5
Data Lost
0
1
Dashes
Blank
If communication is lost, display shows dashes or simply goes blank.
F2.6
Suppressing Zero
0
1
Auto
Suppress
It suppresses leading zeros in strings containing leading zeros.
F2.7
Leading Zero
0
1
2
Auto
00
000
Adds two or three leading zeros in legal for trade applications.
F2.8
Decimal Character
0
1
Dot
Comma
Decimal points can be displayed as dot or comma.
2.9
Over Range
000000
to
999999
000000
to
999999
The weight range can set a display maximum value.
The display will show OVER if weight is out of the set range.
Use short and long press keys to change value and digit respectively.
If set to 000000, the Over Range function is off.