Technical Manual | 808AH V1.2
Anyload Weigh & Measure Inc. @ www.anyload.com | CONFIGURATION
13
4.
CONFIGURATION
4.1
F
UNCTION
S
ETUP
M
ENU
The function setup menu is consisted of different function blocks used to set different configuration
values of 808AH remote displays. There are five function blocks currently available for
configuration showed in the table below.
Block
Menu
Description
F1
DISPLAY
Functions Related to Digits Display
F2
UTILITIES
Functions Related to Utilities and Special Programs
F3
FORMAT
Functions Related to String Formats and Protocols
F4
SERIAL
Functions Related to Data Communications and Serial Ports
F5
AUXILIARY
Functions Related to Switch Inputs and Relay Outputs
F6
-
N/A
F7
-
N/A
F8
-
N/A
F9
DIAGNOSTIC
Advance Diagnostics
4.2
O
PERATING
M
ODES
Mode
Description
AUTOMATIC
Attempts to learn communication speed (baud) and parse string format (protocol) at start up.
It is set as default and active only at start up.
Once it is successful, it can be switched to other modes.
Onboard FUNCTION LED will blink fast at four times a second.
PRESET
Sets the functions based on its internal directory of known communication rates and string formats.
It is useful if auto learn mode has been successful.
Then it can be activated to avoid unnecessary delay and changes startup.
Onboard FUNCTION LED will blink normal once a second.
MANUAL
Sets the functions based on its manually set values stored in its memory.
It is useful if auto learn mode has not been successful or display is not aligned correctly.
Then it can be used to set communication rate and string format manually.
Onboard FUNCTION LED will blink slowly once every two seconds.
