32
Click the button [OK]. And then try to enter the correct password
4.1 T&A Machine Management
4.1.1 Add Unit
Click the button [Add Unit]. Following windows pops up:
Remark:
Terminal No.: This number can be set as you like.
Prompt: Device ID range is 1-99999999, and default is 1. (Device ID must enter as
same as in the communication software), When the device ID as “Null” in the terminal,
must use the lasted 8 digit of the serial number for communication with software.
Device Name: You can set it as you like.
Device Group: This group is used to manage the terminal machine.
T&A Status: There are three options: Actual Status, on duty and off duty. When we
set it as “Actual Status” the attendance records’ status in the software are as same they
are in the device. If you set it as “ON Duty”, all the records’ status which is from this
machine will be “On duty”.
USB: Connect the terminal via USB cable;
LAN: Input the terminal’s IP address. The default IP address is 192.168.0.218.
RS485: The default COM value is COM1;
Click the button [OK] to save the information. Can see a
saffron yellow terminal
Prompt
：
Device ID is the unique mark, for software to recognition by PC. So please
do not
reduplicate Device ID in the LAN application.
