anvajo fluidlab R-300, User Manual, Page: 39 / 69

User Manual fluidlab R-300
40
Edition 202104
Vers.: 1.2
Note : Saving the calibration curve - If you click on the in the “Results” screen, you will
be asked whether or not you wish to save the results. If you tap on “ Save ”, the
calibration curve will be saved under the entered test name in the calibration curve
list
and you will return to the home screen. If you tap on “ Discard ”, the
measurement will not be saved.
Figure 18: “Results” screen.
6.2.5.2 Sample Quantification with Created Calibration Curve
1. Perform an extinction determination of your choice with your samples.
2. Prepare your samples and the respective blank liquid in the cuvettes and
make the samples ready for spectrometric measurement with the
fluidlab R-
300 .
3. Open the slider on the fluidlab R-300 , as described in Chapter 6.2.2.
4. Insert sample carrier adapter 02 or 03, as described in Chapter 6.2.2.
5. On the home screen of the fluidlab R-300, select the Calibration Curve
application by tapping on it.
6. The “Start a test” screen is displayed. Select the curve with which you want to
quantify your sample from the created calibration curves in the “calibration
curve list” by tapping on it (Figure 19).