anvajo fluidlab R-300, User Manual, Page: 33 / 69

User Manual fluidlab R-300
34
Edition 202104
Vers.: 1.2
Figure 11: Insert cuvette in the right orientation before measuring blank.
9. After a successful blank measurement, the device will display the “ Prepare
analysis ” screen and will now prompt you to insert your sample in the
device’s measuring chamber.
10. Remove the blank sample from the device and insert your sample into the
fluidlab R-300 in the correct orientation (Figure 11).
11. Now start the measurement of your sample by tapping on the Continue
button with a green background (Figure 12).
Figure 12 : “Prepare analysis” screen of the Kinetics application.
12. The device now displays the progress of the time-series measurement on
the
“Reaction Kinetics” screen (Figure 13).
13. If you scroll down further, a graph showing the extinction value at the pre-
set wavelength over time is also displayed. Every new measurement will be
automatically added to this graph (Figure 13).
14. It is possible to stop the Kinetics measurement by clicking on “Stop
measuring” or tapping on the (Figure 13).
Note: After clicking “Stop measurement” or tapping on the the process has to be
confirmed by answering the question “Do you really want to cancel the kinetic
measurement?” with “Yes”. As long as the screen is shown, the device will
continue the measurement until “Yes” is chosen.