anvajo fluidlab R-300, User Manual, Page: 23 / 69

User Manual fluidlab R-300
24
Edition 202104
Vers.: 1.2
5.2.4 Offline Mode
The following section describes how you can disable the fluidlab R-300 WLAN adapter
if the WLAN or hotspot function has been enabled.
1. Open the settings menu of the fluidlab R-300 by tapping the menu icon ( )
2. Tap on the switch to the right of “WLAN” so that it is greyed out. When the
switch is greyed out, WLAN mode is disabled.
3. Tap on the switch to the right of “Hotspot” so that it is greyed out. When the
switch is greyed out, hotspot mode is disabled.
4. Both WLAN and hotspot modes are now disabled. As a result, your device is
in offline mode.
5.3 Software Update
Software updates can be provided for the fluidlab R-300 by the manufacturer. They
are made available on the manufacturer’s update server. As part of the updates:
• Security features are updated
• Known software bugs are removed
• Performance improvements are implemented
• Operating concepts are optimised
The fluidlab R-300 checks automatically whether new software updates are available
if there is an existing Internet connection (see Chapter 5.2.2). Moreover, the user can
also manually initi
ate the update check by clicking on ‘Check for updates’ . The
installation of these updates is explained below in this chapter.
Updates always require the consent of the user. Please contact our Sales department
about the provision of paid content.
Note: In order to be able to receive software updates for the device, it is necessary for the
fluidlab R-300 to be connected to a WLAN and be authorised to access the
Internet. If in any doubt, please consult a network administrator in order to permit
Internet access for the fluidlab R-300. The device can also be updated via the
Hotspot and the datalab (see Chapter 7.3).
Warning!
To install the update, the battery level must be at least 50%. Otherwise, the installation
will be aborted for safety reasons.