AST, AST-L, and AST-PLUS Models
11
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
4.4 Installation
4.4.1 Preparation
WARNING
Failure
to
prevent the
truck from
moving during the installation of the liftgate could
result in serious personal injury or death.
SAFETY
INSTRUCTIONS
Use two people to safely
install the liftgate.
NOTICE
Check the OEM vehicle manual for
any special requirements prior to
welding on the truck’s frame. If
required, disconnect the battery cable before welding on
the truck frame.
1. Remove the banding securing the liftgate and
loose parts to the pallet. Remove the curbside and
streetside mounting plates, the floor extension, the
dock bumpers, and the side gussets from the liftgate
frame.
Typical Single Liftgate Shipping Pallet (steel liftgate shown).
Typical Multiple Liftgate Shipping Pallet (aluminum liftgates shown).
2. Before proceeding, make sure the complete liftgate
and its related parts have been received, as listed
in the chart. In some cases, related installation parts
will be located on the shipping pallet or they may be
shipped separately. Some parts are also placed inside
the pump box.
Liftgate Installation Package
Description
Qty.
Located on Pallet
Floor Extension
1
Streetside Step and Dock Bumper Assembly
1
Curbside Step and Dock Bumper Assembly
1
Streetside Mounting Plate
1
Curbside Mounting Plate
1
Power Cable with 200 Amp Fuse
1
Located Inside Pump Box
Information Packet (contains decals, manuals, shims,
and other related installation information)
1
Plastic Tie Wraps
–
ALI-00401
3. Release the latch pin from its storage position.
ALI-0040
9c
NOTICE
The latch pin is only for in-transit
locking of the liftgate. DO NOT slide
the latch pin into the latched position
when the platform is unfolded or raised. If this occurs,
serious damage to the liftgate can occur when the liftgate
is lowered.