Anritsu Site Master S330A, User Manual, Page: 77 / 85

Step 4.
Click on Capture, in the top menu bar, and select
Capture Multiple Traces from the drop-down
menu.
Step 5. Enter the number (or numbers) of the stored-display
memory location(s) (1 to 40) from which you wish to
display traces in Site Master Software Tools.
Step 6. Select “OK.”
Step 7. Observe that the “Acquiring Control” box appears on
the screen, then disappears as the traces are automati-
cally acquired.
3-8
Chapter 3 Screen Capture Program
Com port
(Program defaults to Com2)
Serial Interface
Figure 3-3. Equipment Setup for Site Master Tools Operation