Anritsu Site Master S330A, User Manual, Page: 25 / 85

Frequency
Menu
(FREQ)
Provides for setting sweep frequency end-points.
Also provides access to the Marker Menu. Selected
frequency values may be changed using the keypad
or Up/Down Arrow key.
Choosing
FREQ
causes the soft keys, below, to be
displayed and the corresponding values to be shown
in the message area.
q
F1 — Opens the F1 parameter for data entry. This
is the start value for the frequency sweep. Press
ENTER
when data entry is complete.
q F2
— Opens the F2 parameter for data entry. This
is the stop value for the frequency sweep. Press
ENTER when data entry is complete.
q
MKRS — Selects the Markers Menu, described
on page 2-10.
q MAIN
— Returns to the Main Menu.
2 - 9
Chapter 2 Operation
F1 F2
MKRS
MAIN