Anritsu Site Master S330A, User Manual, Page: 57 / 85

Step 12.
Press the MKRS soft key to go to the Markers Menu
(page 2-10).
Step 13.
Press the M1 soft key.
Step 14.
Press the ON/OFF soft key to turn M1 on, then press
the EDIT soft key. Enter the desired numerical value
using the keypad or the Up/Down Arrow key. Press
ENTER when data entry is complete.
Step 15.
Press the BACK soft key to return to the Markers
Menu.
Step 16.
Repeat steps 13 thru 15 for M2.
Step 17.
Press the MAIN soft key to return to the Main Menu.
Step 18.
Press the DIST soft key to go to the Distance Menu.
Step 19.
Press the MORE soft key to go to the Distance Sub-
Menu.
Step 20.
Press the CABLE soft key to select a coaxial cable
from the menu or press the LOSS and PROP V soft
keys to enter cable loss and relative propagation ve-
locity parameters manually (page 2-14). The loss of
the cable shown in the cable menu is @1000 MHz.
Step 21. Enter the desired numerical values using the keypad
or the Up/Down Arrow key. Press
ENTER when
data entry is complete.
Step 22.
Press the MAIN soft key to return to the Main Menu.
Step 23. After calculations are complete (approximately 8 sec-
onds), observe that the message area displays the re-
turn loss data at the two marker points.
2 - 41
Chapter 2 Operation