Anritsu Site Master S330A, User Manual, Page: 18 / 85

to a HP Deskjet 340 printer or a Seiko DPU-411
Thermal printer.
Test
Port
Provides RF output, 50
W
impedance.
RF Det
Provides RF detector input for the Power Monitor.
Keypad
Turns the liquid crystal display (LCD) back-lighting
ON or OFF. (Leaving back lighting off conserves
battery power.)
AUTO
SCALE
Automatically scales the display for optimum
resolution.
CAL Opens a calibration menu. Use Up/Down Arrow key
and
ENTER
key to select a stored calibration (A or
B) or turn CAL off.
ENTER
Implements certain menu and key selections.
ESCAPE
CLEAR Exits the present operation and/or clears the display.
If a parameter is being edited, pressing this key will
clear the value currently being entered and restore the
last valid entry. Pressing this key again will close the
parameter. During normal sweeping, pressing this
key will move up one menu level.
LIMIT
Calls up the Scale Menu.
MARKER Calls up the Marker Menu.
ON
OFF
Turns the Site Master on or off. When turned on, the
system state at the last turn-off is restored. If the
2 - 2
Chapter 2 Operation