Anritsu 37 C Series, Operation Manual

Page: 335 / 603

power and hence, enhanced system dynamic range. This concern also
applies for the V-connector cables that connect the 37397C VNA to the
multiplexing couplers. Placing the probe station directly in front of the
ME7808A can minimize these cable lengths. Note that the probe sta-
tion is shown on the side of the rack simply for clarity purposes.
For more information on wafer probe station integration, please con-
tact Anritsu at 1-800-ANRITSU.
15-6
BROADBAND MENUS,
FLOW The menus associated with the broadband system are shown in Figure
15-
BROADBAND MENUS, FLOW BROADBAND SYSTEM
15-14 37XXXC OM
Option
Menu
MENU OPTNS
MENU BB2
MENU BB3
REAR PANEL
OUTPUT
DIAGNOSTICS
BROADBAND
DEFINITION
OPTIONS
RECEIVER MODE
TO SELECT
PRESS <ENTER>
PRESS <ENTER>
TO SELECT
PRESS <CLEAR>
TO ABORT
SOURCE CONFIG
TEST SET CONFIG
RF ON/OFF
DURING RETRACE
MENU BB4
BROADBAND BAND 2
BAND 2 START FREQ
65.000000000 GHz
BAND 2 ST0PT FREQ
110.000000000 GHz
DEFAULT RANGE
ACCEPT RANGE
TO MENU SU1/SU2
BROADBAND
TEST SET MODULES
PORT 1 MODULE
3740/41/42/NONE
3740/41/42/NONE
PORT 2 MODULE
ACCEPT CONFIG
PRESS <ENTER>
TO SELECT
OR SWITCH
PRESS <CLEAR>
TO ABORT
PRESS <CLEAR>
TO ABORT
BROADBAND
TEST SET
BROADBAND BAND 2
WR10 EXTENDED
PORT 1 MODULE
3742
PORT 2 MODULE
3742
WARNING
CONTINUING
MAY INVALIDATE
CURRENT
SETUP AND
CALIBRATION
PRESS <ENTER>
TO CONTINUE
Table 15-8.
Broadband System Menu Flow