annke DN41R User Manual Download Page 75

Page: 75 / 106

Digital Video Recorder User Manual

Figure 10. 16 External Port Settings Dialog Box

2) Click

Apply

button to save the settings.

3) You can click

Refresh

button to get the latest status of the port mapping.

Figure 10. 17 UPnP™ Settings Finished-Manual

10.2.6Configuring More Settings

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

More Settings

tab to enter the More Settings interface.

Figure 10. 18 More Settings Interface

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.



Alarm Host IP/Port

: With a remote alarm host configured, the device will send the alarm event or

exception message to the host when an alarm is triggered. The remote alarm host must have the CMS
(Client Management System) software installed.
The

Alarm Host IP

refers to the IP address of the remote PC on which the CMS (Client Management

System) software (e.g., iVMS-4200) is installed, and the

Alarm Host Port

must be the same as the

alarm monitoring port configured in the software (default port is 7200).



Multicast IP

: The multicast can be configured to realize live view for more than the maximum number

of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0 to

239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to

239.255.255.255.

When adding a device to the CMS (Client Management System) software, the multicast address must

be the same as the device’s multicast IP.



RTSP Port

: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use

Summary of Contents for DN41R











































































































Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands

annke DN41R, User Manual

Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands