Digital Video Recorder User Manual
38
•
Redundant Record:
Enabling redundant record means you save the record in the redundant HDD. See
Chapter 5.8 Configuring Redundant Recording
.
•
Record Audio:
Enable this feature to record the sound and disable it to record the video without sound.
•
Video Stream:
Main stream and sub-stream are selectable for recording. When you select sub-stream,
you can record for a longer time with the same storage space.
•
Enable 960 Mode:
The option is supported by analog cameras. Enabling the 960 mode to enable the
WD1 resolution for the main stream, otherwise, the resolution supports up to 4CIF. And the option
does not supported by TVI cameras, while the WD1 resolution is available all the time.
The
Redundant Record
option is only available when the HDD mode is
Group.
Redundant HDD is required for the redundant record function. For detailed information, see
Chapter
11.4.2 Setting HDD Property
.
For network cameras, the parameters of Main Stream (Event) are not editable.
5.
Click
Apply
to save the settings.
6.
Optionally, you can click
Copy
to copy the settings to other analog channels if needed.
You can copy the same settings to the cameras with same signal, e.g., the channel No. 1-3 connect to the TVI
cameras, and the channel No.4 connects to an analog camera, and then the settings of channel No. 1 can be only
copied to channel 2 and 3.
Figure 5. 5 Copy Camera Settings
7.
Set encoding parameters for sub-stream.
1) Select the
Substream
tab.
Figure 5. 6 Sub-stream Encoding
2) Select a camera in the camera dropdown list.
3) Configure the parameters.
4) Click
Apply
to save the settings.
5) (Optional) If the parameters can also be used to other cameras, click
Copy
to copy the settings to other
channels.
