annke DN41R User Manual Download Page 26

Page: 26 / 106

Digital Video Recorder User Manual

3.3 Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface, dwell

time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 6 Live View-General

The settings available in this menu include:

•

Video Output Interface:

Selects the output to configure the settings for.

•

Live View Mode:

Selects the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in

Live View.

•

Enable Audio Output:

Enables/disables audio output for the selected camera in the live view mode.

•

Volume:

Adjust the volume of the audio output.

•

Event Output:

Designates the output to show event video; if available, you can select a different video

output interface from the Video Output Interface when an event occurs.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Set the camera order.

1) Select

View

tab.

Figure 3. 7 Live View- Camera Order

Select a

View

mode in

Select the small window, and double-click on the channel number to display the channel on the

window.
If you do not want the camera to be displayed on the live view interface, click the corresponding

to stop it.
You can also click

button to start live view for all the channels and click

to stop all the live

view.

Click the

Apply

button to save the setting.

Summary of Contents for DN41R











































































































Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands

annke DN41R, User Manual

Search results

Summary of Contents for DN41R

Reviews:

Related manuals for DN41R

Brands by name

Popular brands