IT
GB
DE
FR
ES
C
139
61
830
1_r
ev.
1.fm
- 13 -
English
To carry out this operation, proceed as follows.
1 - Remove the bottom plate
(C)
and the grid
(D)
from the oven and clean them thoroughly.
2 - Clean the inside parts of the oven to remove
any deposits which may impair its operation.
3 - Dry the surfaces and reassemble the compo-
nents.
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(C)
and remove the control
panel
(B)
.
4 - Undo the screw
(D)
of the pressure connection.
5 - Connect the pressure gauge
(E)
to the pressure
test point
(F)
.
6 - Turn the gas supply tap back on.
7 - Light one of the burners, turn the knob to the full
flame setting (see page 9) then check that the
pressure reading is the same as the val-
ues provided in the table (see back of
manual).
8 - Switch off the burner, turn off the gas sup-
ply tap and disconnect the pressure
gauge.
9 - Restore the initial conditions after com-
pleting the operation.
CLEANING OVEN
CHECKING GAS PRESSURE
IDM-39618300600.tif
D
C
IDM-39618300700.tif
A
B
C
E
F
D
Summary of Contents for 1G1FA0G
Page 122: ......
