16
“It is more important to know what kind of person has a diseasethan
to know what kind of disease a person has.” - Hippocrates
Trouble Shooting
Problems
Checking Points
1. Make sure that the machine is switched on.
2. Check the fuse. See instructions -How to replace the fuse (page 15).
1. Check that the power supply is active.
2. Check that the power cord is correctly positioned into both the
electrical outlet and the power cord connector.
3. Check the machine is switched on.
4. Check the fuse. See instructions -How to replace the fuse (page 15).
No Power
Machine
doesn’t Start
1. Check to see if anything is lodged in the gears.
2. Check the slot between the twin gears is clean.
Machine Stops
1. Check that the machine is correctly assembled.
2. Make sure the machine is not overloaded.
3. Use smaller sizes or portions of food.
4. Check the fuse. See instructions -How to replace the fuse (page 15).
Food is Jammed
Angel Juicer has as automated stop safety system that disables
the machine, when the Feeding Chute is overloaded. In the event of an
automated stop, press the ‘Reverse’ button for 2 to 3 seconds (or press
and hold down as required until it clears) and then press the ‘Start’
Button to continue juicing. Repeat as needed.
Juice is backed up
or clogged in the
Feeding Chute
Twin Gears are stuck to
the Extracting Housing
Slowly feed one piece of food or small portions of food at a time into
the feeding chute.
Plug the Power Cord into the electrical wall outlet.
Turn the main (red rocker) switch ON.
Unlock the Clamp by pulling the lever up.
Place your palm under the Extracting Housing to
catch in case it falls.
Press START button and the Extracting Housing should be released
from the Motor base unit and the motor stops running automatically.
Turn the main(red rocker) switch OFF and unplug the Power Cord.
Carefully pull the Twin Grinding Gears out from the Extracting Housing.
1.
2.
3.
4.
5.
6.
7.
Twin Gears are
Noisy
