Angel Water PurAzone A03, Manual

Page: 29 / 34

25
ITEM NO.
ORDER NO.
DESCRIPTION
QTY.
1 101375 Injector Cap 1
2 102159 O-ring 135 1
3 102457 Injector Screen 1
4 102319 Injector Assy. Z Plug-Filter 1
5 101825
101826
101827
101828
101829
101830
101831
101832
101833
101834
101835
Injector Assy. A Black
Injector Assy. B Brown
Injector Assy. C Violet
Injector Assy. D Red
Injector Assy. E White
Injector Assy. F Blue
Injector Assy. G Yellow
Injector Assy. H Green
Injector Assy. I Orange
Injector Assy. J Light Blue
Injector Assy K Light Green
1
Not Shown 106767 O-ring 011 *
Not Shown 106768 O-ring 013 *
ITEM NO. ORDER NO. DESCRIPTION QTY
1 102322 Refill Port Plug Assy 1
2 101414 Elbow Locking Clip 1
4 102130 Nut 3/8 1
5 101620 Elbow Cap 3/8 1
6 102153 O-Ring 019 1
7 110239 Check Valve 1
Injector Cap, Injector Screen, Injector Plug and O-Ring
1
2
3
4
5
* The injector plug and the injector each contain one 011 (lower) and 013
(upper) o-ring.
Note: For upflow position, injector is located in the up hole and injector
plug in the down hole. For a filter that only backwashes injector plugs are
located in both holes.
Figure 15
The nuts and caps are designed to be unscrewed or tightened by hand or with the special plastic wrench. If necessary a pliers can be used to unscrew the nut
or cap. Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver in slots on caps and/or tap with a hammer.
Do not use pipe dope or other sealants on threads. Teflon tape must be used on threads of the 1” NPT connection and on the threads for the drain line connec
-
tion. Teflon tape is not necessary on the nut connection nor caps because of o-rings seals.
Refill and Refill Port
7
4
5
**This part is required
for backwash only
systems.
1
6
2
Figure 16