Angel Water PurAzone A03, Manual

Page: 17 / 34

16
MAX FLOW
DAY
6
12.7
GAL
STEP 6D
STEP 6D
–
Flow rate,
maximum of each of last seven days: The maximum flow rate in gallons
per minute that occurred in each of the last seven days will be displayed. Press arrow to
display maximum flow rate today = 0, yesterday = 1. This display will equal zero if a water
meter is not installed. Press the NEXT button to exit Diagnostics. Press REGEN to return to
the previous step.
alT + FIrST
cYc
TTT
STEP 7D
STEP 7D
–
MAV Drive History
–
Not displayed if MAV set to off.
ccc
VVV
• First - Average of 1st three drive times of MAV in that direction
• Last - Last drive time measured for that MAV in that direction
• Ave - Average drive time measured for MAV in that direction
• TTT - Drive time (1425 = 14.25 seconds)
• CCC - Total number of cycles for that MAV
• VVV - Relative drive voltage
RETURN TO NORMAL MODE
MAV drives piston "in" is designated by (-) sign.
MAV drives piston "out" is designated by (+) sign.
Valve History
(Can not be reset)
STeP 1VH
STEP 1VH
–
Press and simultaneously for three seconds and release, then press and
simultaneously and release. If screen in step 2VH does not appear in 5 seconds the lock on
the valve is activated.
TOTAL DAYS
970
STeP 2VH
STEP 2VH
–
Days, total since start-up: This display shows the total days since startup. Press
the NEXT button to go to Step 3VH. Press REGEN to return to previous step.
TOTAL REGENS
235
STeP 3VH
STEP 3VH
–
Regenerations, total number since start-up: This display shows the total number
of regenerations that have occurred since startup. Press the NEXT button to go to Step 4VH.
Press REGEN to return to previous step.
TOTAL GALLONS
175
GAL
x1K
STeP 4VH
STEP 4 VH
–
Volume, total used since start-up:
This display shows the total gallons treated
since startup. This display will equal zero if a water meter is not installed. Press NEXT button to
exit Valve History. Press REGEN to return to previous step.
errOr lOG
1- - -
STEP 5VH
STEP 5VH
–
error log history:
up to 10 errors. With STALL ERRORS 102, 107, 117, right
upper
corner of display indicates piston position at time of stall.
If no errors have occurred " _ _ _ _" will
be displayed. Press NEXT to exit valve history.