Page 78
New iStar ICCD
Pre Acquisition Setup - Data
5.3.8.3 - auto-save
Auto-Save
allows user to set parameters and controls for the auto saving of acquisition files thus removing the worry of
lost data and files. Selection of this mode is accessible under the
Auto-Save
tab on the
Setup Acquisition
dialog box.
The
Auto-Save
dialog box appears, e.g.:
If selected, acquisitions will be saved automatically after each individual one is completed. Each subsequent auto-saved
file will over-write the previously auto-saved one.
In the Auto-Save dialog box, a
Stem Name
may be entered. This is the main root of the name that the acquisition is to
be saved as.
The Stem Name can be appended with a number of details, e.g.:
•
Operator name (supplied by user)
•
Computer name
•
Camera type
•
Date
•
Time
An auto-increment On/Off tick box allows a number to also be entered to the main stem name. This number is
automatically incremented each time a file is saved.
Any combination of these may be selected by activating the relevant tick box, e.g.:
Note: This function will only auto-save single scan, kinetic series or accumulated images.
