manualshive.com logo in svg

Andor Technology New iStar, User Manual

Share
Download
Andor Technology New iStar User Manual Download Page 15

Page 15

New iStar ICCD

 

About the New iStar 

SECTION 1 - ABOUT THE NEW iSTAR

1.1 - INtRoDUCtIoN

Thank you for choosing the Andor New iStar ICCD. From the outset, the New iStar has been designed for ease of use, 
providing the latest in CCD electronics and integrated, ultra-fast, gated image intensifiers. The on-board Digital Delay 
Generator (DDG™) provides seamless and precise control of all timings within the camera through Andor Solis software 
or Andor Software Development Kit (SDK).

This camera is designed to be used in research laboratories and other controlled scientific environments.

If you have any questions regarding your New iStar system, please feel free to contact your local Andor representative.
Contact details are available in Section 1.3.  

1.2 - WoRKING WItH tHe UseR GUIDe

This User Guide is your ‘road-map’ to the Andor New iStar software and hardware. In the software section, all the 
controls needed for an operation are grouped and sequenced appropriately in on-screen windows.

As far as possible, the descriptions in this User Guide are laid out in sections that mirror the Windows Interface and use 
standard Windows terminology to describe the features of the user interface. 

If user is unfamiliar with Windows, the documentation supplied with the Windows installation pack will provide users with 
a more comprehensive overview of the Windows environment.

Should this User Guide be misplaced or an electronic copy be required, please visit MyAndor at: 

andor.com/my

 and 

follow the download instructions (log-in is required).  

 

 

 

 

 

 

 

Summary of Contents for New iStar




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands