manualshive.com logo in svg

Andor Technology New iStar, User Manual

Share
Download
Andor Technology New iStar User Manual Download Page 37

Page 37

New iStar ICCD

Solis Software Operation

3.4.3 - New Hardware Wizard

When the New iStar camera is connected to a PC for the first time, the 

Found New Hardware Wizard

 screen will appear.

1.  Select the ‘

No, not this time only’

 option then click 

Next>

 .

2.  Select the 

‘Install from a list or specified location

 

(Advanced)

 option then click 

Next

>.

3.  Navigate to the directory where the Andor Solis software was installed to on the PC, then click 

Next> so that the 

Installation Wizard can start.

4.  When the hardware installation has been completed, the following screen will appear.

5.  Click the 

Finish

 button to complete the installation.

Note: If the camera is connected to a different USB port, steps 1 – 5 will have to be repeated on the first 
connection only.

6

.  Check that the New iStar is correctly recognized and installed by opening the Device Manager in Windows, System 

Properties section. The New iStar will be showing under the LibUSB root, as highlighted below:

7.  The New iStar is now ready to be used.

Summary of Contents for New iStar




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands