manualshive.com logo in svg

Andor Technology New iStar, User Manual

Share
Download
Andor Technology New iStar User Manual Download Page 132

Page 132

New iStar ICCD

Operation 

6.2.3 - acquisition mode: Photon Counting

Same as Acquisition Mode: Kinetic. Please refer to section 5.3.1.6 to set up the appropriate counting thresholds.

6.2.4 - acquisition mode: Fast Kinetics

Allows the user to acquire a short kinetics series with a rapid cycle time. The image is captured on a sub section of the 
sensor array, with the remainder of the array being used as a storage area until the data series is readout. The user can 
specify the exposure time for each frame within the series (in seconds), the size of the sub-section capturing the image 
(in rows) and the binning pattern. The number in the series can also be entered but is limited to a maximum value equal 
to the number of rows in the sensor array divided by the number of rows specified in the sub section.

Summary of Contents for New iStar




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands