Andor Technology New iStar User Manual Download Page 36

Page: 36 / 155

Page 36

New iStar ICCD

3.4 - INstallING soFtWaRe aND Usb DRIVeRs

3.4.1 - minimum Computer Requirements

•

3 GHz Quad Core or 2.4 GHz multi core processor

•

2 GB RAM

•

100 MB free hard disc to install software (at least 1 GB recommended for data spooling)

•

USB 2.0 High Speed Host Controller capable of sustained rate of 40 MB/s

•

Windows (XP, Vista or 7) or Linux

3.4.2 - Installing solis software and Usb Driver

1. Terminate & exit any programmes which are running on the PC.

2. Insert the Andor Solis CD. The InstallShield Wizard should now start. If it does not start automatically, run the

file setup.exe directly from the CD.

3. Select appropriate location for installation of software and drivers on your computer / network.

4. When prompted, select New iStar as shown below.

5. Continue installation and restart your computer - when prompted - to successfully complete the installation.

6. The shortcut icon

for Solis will appear on the desktop on re-start.

7. The New iStar is now ready to be connected to a PC / laptop and powered on.

Installing the New iStar

Summary of Contents for New iStar




























































































































































Search results

Summary of Contents for New iStar

Reviews:

Brands by name

Popular brands

Andor Technology New iStar, User Manual

Search results

Summary of Contents for New iStar

Reviews:

Brands by name

Popular brands