manualshive.com logo in svg

Andor Technology New iStar, User Manual

Share
Download
Andor Technology New iStar User Manual Download Page 139

Page 139

New iStar ICCD

6.2.4.4.3 - advanced: burst/Fit Pulses per exposure 

Description

Several gate pulses are generated within an exposure. For every successive exposure in the series, the gate delay 
applied is incremented by the gate step value. For each exposure, the external trigger generates the first gate pulse, 
subsequent gate pulses are generated internally via a user defined frequency or period, or the user defines the number 
of pulses per exposure. The maximum number of pulses is applied that can fit into the exposure, given the final gate 
delay in the series. Any subsequent triggers that arrive during the exposure are ignored. 

The external trigger rate cannot exceed 15 kHz.

Operation

Burst per Exposure

External Trigger

Fire

gate Monitor

ARM

External Trigger

Fire

gate Monitor

ARM

Fit to CCD Exposure

Summary of Contents for New iStar




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands